73-87 Weld On 4 Link Cantilever Kit + Watts Link | C10

73-87 C10 weld On 4 Link with a cantilever set up for the airbag. All brackets are 3/16". The bars on the 4 link are 1.5"X 1/8 wall thickness tubing. Comes fully welded ready to install to existing mounting holes, you will have to drill out the holes to 1/2" as from factory they are about 7/16".  The axle brackets will be shipped loose for you to weld on your axle. I am also including a watts link.

The bars for the cantilever are 3/16" wall DOM tubing. It will come with weld on axle brackets. The front mount and rear cantilever will bolt up to stock hanger mounts. Look at  picture and confirm your hanger has same bolt pattern otherwise it will not bolt up. Made to use a 10 bolt or any axle with 3" axle tubes. If you are wanting to use a different axle, email me so i can confirm i can accomodate that. Will come with all the hardware and bare metal. Can powdercoat all parts with exception of axle brackets for additional 100 dollars for any simple color

Lead time is 15-20 days since they are all built to order and demand. I will be making a few variations of this kit to meet everyone's budget. Take a look at all my other auctions for these trucks. This kit was tested on a shortbed c10. which will work on only c10's. This is a modified version of my heavier duty kit made to work on the C10 trucks

If you want to use on single cab c20 email me or call so I can adjust bolt pattern to bolt up in stock location. Designed to work on trucks using 56" springs. If your truck has 52" ones, confirm that the frame is drilled in the rear to move the spring hanger back 4" for the longer springs. They all should come predrilled but need to double check. 

thesimplec10@gmail.com 615-578-4540